TubeTrace with BSX ™

TubeTrace, with “cut-to-length” BSX self-regulating heat tracing, is designed to provide freeze protection or temperature maintenance for tubing where no “steam out” of the tubing is possible. BSX withstands temperature exposures of 185°F (85°C).

Self-regulating BSX heat tracing

  • Varies in response to the surrounding conditions along the entire length of a circuit.
  • Lower risk of overheating the tube or product.
  • Installed cost is lower because “cut-to-length” BSX makes end connections easy with minimal waste.
  • Is approved for use in ordinary (nonclassified) areas and Division 2 and Zones 1 & 2 hazardous (classified) areas. (Division 1 approvals also available)

Operating Voltage: 110-120 or 208-277 VAC

Maximum Maintenance Temperature: 150°F

PRODUCT LITERATURE

TubeTrace BSX Product Specification 

TubeTrace Heating Cable System Accessories Product Specification 
TubeTrace and ThermoTube System Accessories Product Specification 
Terminator / FAK Connection Kits 

Heated Instrument Tubing Specification 
Tubing Bundles Introduction 
 

 

INSTALLATION INSTRUCTIONS

FAK-1 Split Bulkhead Entry Kit 
FAK-10-A-B-C: Heat Shrink Seal 
FAK-2 and FAK-2L 90 Degree Elbow Splice Kit 
FAK-4 and FAK-4L In-Line Splice Kit 
FAK-4S/FAK-4LS Temperature Sensor Kit 
FAK-4T/FAK-4LT Thermostat Sensor Kit 
FAK-5 and FAK-5L 90 Tee Splice Kit 
FAK-7 Seal Kit 
FAK-8/ FAK-8L: In-Line Splice Kit 
FAK-9 Bulkhead Entry Heat Shrink 
Mechanical Tubing Bundle Bender 
Tubing Bundle Installation Procedures 

INSTALLATION VIDEOS

FAK-2 and FAK-2L Installation Procedures Video 
Terminator DP FAK-1 Installation Procedures Video 
Terminator DP FAK-2 and FAK-2L Installation Procedures Video 
Terminator DP FAK-4 and FAK-4L Installation Procedures Video 
Terminator DP FAK-5 and DP FAK-5L Installation Procedures Video 
Terminator ZP FAK-1 Installation Procedures Video 
Terminator ZP FAK-2 and FAK-2L Installation Procedures Video 
Terminator ZP FAK-4 and FAK-4L Installation Procedures Video 
TubeTrace Tubing Bundles Installation Procedures Video 

Division Classification

Terminator DP FAK-1 Installation Procedures Video 

 

Division Classification

Terminator DE-B / FAK-1 
Terminator DP / FAK-1 
Terminator DP/FAK-2 and FAK-2L 
Terminator DP/FAK-4 and FAK-4L 
Terminator DP/FAK-5 and FAK-5L 
Terminator DS/DE FAK-1 
Terminator DS/DE FAK-2 and FAK-2L 
Terminator DS/DE FAK-4 and FAK-4L 

Zone Classification

Terminator ZP/FAK-1 
Terminator ZP/FAK-2 and FAK-2L 
Terminator ZP/FAK-4 and FAK-4L 
Terminator ZP/FAK-5 and FAK-5L 
 

About Company

PECON is a growing and promising Singapore company, we started our commenced our journey in 2011 to work with Process and related industries in the undertaking of Electrical and Instrumentation Engineering service and contracts.

Read More

Connet With Us

Quick Contact

Address

POWER ENGINEERING & CONTROLS PTE LTD

Address:
12B ENTERPRISE RD, ENTERPRISE 10, SINGAPORE 627682
Tel:
+65 67107018
Fax:
+65 65703220
Website:
www.pecon.com.sg
Email:
This email address is being protected from spambots. You need JavaScript enabled to view it.